[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f3a3f1de-0fea-2dd8-cea6-785a857af831@oryx.us>
Date: Sat, 1 Sep 2018 11:35:57 -0500
From: Jerry Kemp <cryptosys@...x.us>
To: john-users@...ts.openwall.com
Subject: Re: How to use multiple lists at the same time?
I have split up list, like you discuss below, than ran each in a serial fashion via a
standard Korne shell script.
Worked fine for me, YMMV.
Jerry
-------- Original Message --------
From: Eric Oyen
Sent: Sat, Sep 1, 2018 11:19 AM CDT
To: john-users@...ts.openwall.com
Subject: [john-users] How to use multiple lists at the same time?
Hello fellow users.
Ok, my situation is this: I use a 30+ GB file, which can be a real PITA to edit. I have used the split command (here on OS X) to
split those down to more manageable sized (about 10 MB each) Sure, this will create a lot of files. What I want JTR to do is to be
able to load each list in turn during the same session to process against hashes I have.
Now, I found an old entry in the archives that dates back to 2012 and tried it, but it failed with an error code. So, any way to do
this without having to worry about a massively huge file that’s hard to move around (took me 2 hours to move it off my primary HDD
to an external USB drive).
Thanks,
-Eric
Powered by blists - more mailing lists
Confused about mailing lists and their use?
Read about mailing lists on Wikipedia
and check out these
guidelines on proper formatting of your messages.
